Scratch

I made a Wall Jumping Engine, if anyone would like to see it. 

Anyone can use it, but give credit please!

Also, if anyone would like to check it for glitches/improve it, that would be much appreciated.

WHAT IT DOES:
Basically it is like a normal movement engine, with a slight addition.  It detects if you are not on the ground, pressed against a wall, and facing the wall.  Then it presses you against the wall, slowly sliding down.  If you press up, it pushes you off the wall.  If you hit the ground, you fall off the wall.  If you press the arrow key away from the wall, you drop.

HOW IT WORKS:  (I will be demonstrating jumping off a left wall, the right wall is the same with the horizontal variables switched)

If you aren't on the ground, if left sensor detects wall and Dir=left, set <action> to "wall" (Action is a variable for my wall-jump costume).  Set X velocity to 0 (stops your horizontal motion so you don't fly off the wall).  Set Y velocity to -0.1 (makes you slowly slide down).  If "Jump"=3, (Jump is a variable to detect your pressing of up the up arrow, if it is one you jumped off the ground, if it is 2 you are able to jump off the wall, if it is 3 you did jump off the wall) set Y velocity to 10, set X velocity to 5 (pushes you off the wall).

Last edited by Kileymeister (2010-03-28 20:12:08)