Scratch

sparks wrote:

in standard size the library has 49 pages. Though I see your point, including the old thread there are 112 pages! That's a total of 2790 posts!

EDIT: this post broke over to the 50th page    So 113 pages!

I was originally going to assume mine would go over, but decided I could edit it if it did.

here's a panther motion block:

Point at x: $Number$ y: $Number$

| t3 t4 |
    t3 _ t1 @ t2 - self referencePosition.
    t4 _ t3 x abs < 0.001
                ifTrue: [t3 y < 0
                        ifTrue: [90]
                        ifFalse: [270]]
                ifFalse: [((t3 x >= 0
                        ifTrue: [0]
                        ifFalse: [180])
                        - ((t3 y / t3 x) arcTan * 57.2957795131)) rounded].
    self rotationDegrees: t4

TuragaTreeko wrote:

Haha, woops. I guess that wasn't as good as I hoped it would be. I'm not all that good at this. But I WILL keep trying! I'm determined.



did you notice I used you as the default value? 

Yes. I also saw what you wrote on your wiki page:

TuragaTreeko wrote:

I look up to scimonster, because he is a great programmer and just an awesome person.

Scriptmaster01 wrote:

TuragaTreeko wrote:

Pecola1 wrote:

Once you get better you wont make as many mistakes.    But notice I said, "as many"    I make a lot of mistakes still. XD I just recently compleatly forgot to put 'self' before commands for a whole script I was making.       You may not make as many mistakes as I do.

I am so happy that all the Scratchers here help me out. I try to be helpful and NOT annoying, but sometimes I fail at that. I think I gave someone the wrong code for the URL block. 

Oh, and also, does anyone know, would I need code for a ('graphic effect %g' #r #report) type block? Please help. Oh, is there a problem with the #report part? I forget how to do the last part on reporters.

This is what I did
added:

Code:

('graphic effect %g' #r #report:)

and added the code

Code:

report: t1 
    filterPack ifNil: [filterPack _ FilterPack new].
    'blur' = t1 ifTrue: [^ filterPack blur].
    'brightness' = t1 ifTrue: [^ filterPack brightnessShift].
    'fisheye' = t1 ifTrue: [^ filterPack fisheye].
    'color' = t1 ifTrue: [^ filterPack hueShift].
    'mosaic' = t1 ifTrue: [^ filterPack mosaicCount].
    'pixelate' = t1 ifTrue: [^ filterPack pixelateCount].
    'pointillize' = t1 ifTrue: [^ filterPack pointillizeSize].
    'saturation' = t1 ifTrue: [^ filterPack saturationShift].
    'transparency' = t1 | ('ghost' = t1) ifTrue: [^ self transparency].
    'water ripple' = t1 ifTrue: [^ filterPack waterRippleRate].
    'whirl' = t1 ifTrue: [^ filterPack whirl].
    ^ 'Error!'

that should work

That should work, but I'd recommend having the name a little more descriptive, such as getEffect:

Scriptmaster01 wrote:

TuragaTreeko wrote:

Pecola1 wrote:

Once you get better you wont make as many mistakes.    But notice I said, "as many"    I make a lot of mistakes still. XD I just recently compleatly forgot to put 'self' before commands for a whole script I was making.       You may not make as many mistakes as I do.

I am so happy that all the Scratchers here help me out. I try to be helpful and NOT annoying, but sometimes I fail at that. I think I gave someone the wrong code for the URL block. 

Oh, and also, does anyone know, would I need code for a ('graphic effect %g' #r #report) type block? Please help. Oh, is there a problem with the #report part? I forget how to do the last part on reporters.

This is what I did
added:

Code:

('graphic effect %g' #r #report:)

and added the code

Code:

report: t1 
    filterPack ifNil: [filterPack _ FilterPack new].
    'blur' = t1 ifTrue: [^ filterPack blur].
    'brightness' = t1 ifTrue: [^ filterPack brightnessShift].
    'fisheye' = t1 ifTrue: [^ filterPack fisheye].
    'color' = t1 ifTrue: [^ filterPack hueShift].
    'mosaic' = t1 ifTrue: [^ filterPack mosaicCount].
    'pixelate' = t1 ifTrue: [^ filterPack pixelateCount].
    'pointillize' = t1 ifTrue: [^ filterPack pointillizeSize].
    'saturation' = t1 ifTrue: [^ filterPack saturationShift].
    'transparency' = t1 | ('ghost' = t1) ifTrue: [^ self transparency].
    'water ripple' = t1 ifTrue: [^ filterPack waterRippleRate].
    'whirl' = t1 ifTrue: [^ filterPack whirl].
    ^ 'Error!'

that should work

weird. It just reported everyting as 0.

EDIT: Is there anything special to make a Hat block?

Last edited by TuragaTreeko (2011-06-15 11:38:13)

oh. what is the "whole lot of editing"?

hmm. I'll see if I can figure that out. I'll reprt back. 

EDIT: ooh. try going to scratch blocks>event hat morph >other> start for event. after that... i dunno yet. i'll keep ya posted! 

EDIT: (has nothing to do with hat block) for the user page block i'm working on, i have a problem. it says that it expects an argument (most likely because of the t1 insert being a part of the url) help?

Last edited by TuragaTreeko (2011-06-15 17:40:19)

why won't anyone add my blocks?

TuragaTreeko wrote:

Pecola1 wrote:

TuragaTreeko wrote:

hmm. I'll see if I can figure that out. I'll reprt back. 

EDIT: ooh. try going to scratch blocks>event hat morph >other> start for event. after that... i dunno yet. i'll keep ya posted! 

EDIT: (has nothing to do with hat block) for the user page block i'm working on, i have a problem. it says that it expects an argument (most likely because of the t1 insert being a part of the url) help?

I need the code to fix it.    Can you show me the code?

blockspecs: ('open "my stuff" page for user %s on Scratch' #- #doOpenUser: 'scimonster')

ops: openUser: t1
     cursor wait showWhile [ScratchPlugin primOpen URL: http://scratch.mit.edu/users/ t1]

does that help?

doOpenUser: t1
     cursor wait showWhile: [ScratchPlugin primOpen URL: 'http://scratch.mit.edu/users/' , t1]

Last edited by scimonster (2011-06-16 08:36:50)

TuragaTreeko wrote:

Pecola1 wrote:

TuragaTreeko wrote:

hmm. I'll see if I can figure that out. I'll reprt back. 

EDIT: ooh. try going to scratch blocks>event hat morph >other> start for event. after that... i dunno yet. i'll keep ya posted! 

EDIT: (has nothing to do with hat block) for the user page block i'm working on, i have a problem. it says that it expects an argument (most likely because of the t1 insert being a part of the url) help?

I need the code to fix it.    Can you show me the code?

blockspecs: ('open "my stuff" page for user %s on Scratch' #- #doOpenUser: 'scimonster')

ops: openUser: t1
     cursor wait showWhile [ScratchPlugin primOpen URL: http://scratch.mit.edu/users/ t1]

does that help?

Yes but sci beat me to it. 

Pecola1 wrote:

Shared by Hardmath123.
Blockspec:
('%b=%b' #b #a:equalsB:)
Code:
a: t1 equalsB: t2
t1 = t2 ifTrue [^true].
^false.
What it does:
Reports whether or not the two booleans are equal.

I will again ask sparks, may I take this block off seeing how you can already use it on the regular unedited scratch image with the < [] = [] > block?

2 Librarians support. Me & you.

Oh, and that block does the long way. You can just do:
^ t1 = t2

TS: You're a librarian 

.                             

Scratch blocks added: [11]
get first () characters of []
get last () of []
get letters () to () of []
[] () times
Arrow key move with speed ()
Switch the up/down value of the pen
Number of costumes
Switch whether hidden or shown
Get the name of costume number ()
Am I on [costume] ? All by Hardmath123
beep By meew0

Other updates: [0]

Update carried out by block librarian: TheSuccessor
________________________________________________________________________________
^home
^updates archive

Last edited by YourLocalBlockLib (2011-06-17 16:09:18)