Scratch
archived forums
This is a read-only archive of the old Scratch 1.x Forums. Try searching the current Scratch discussion forums.
#1 2010-09-16 03:40:10
- bsorensen5
- Scratcher
- Registered: 2010-09-12
- Posts: 1
Sound input
an option to take sound input from the stereo mix rather than a microphone.
This will allow sound control from the pc output such as a song playing in itunes etc... without getting owned by the static death trap that is a mic input. obviously any sounds within the project would also be directly captured - clean.
as is the sound control isnt working online so it would be interesting to see if removing the mic fixes that as well.
Offline
#2 2010-09-16 22:22:34
Re: Sound input
You can already do this (at least on a Windows computer.) Just go to your sounds settings, and under your Voice Input settings (on XP, Control Panel > Sounds and Audio Devices > Voice tab > "Volume" under Voice recording) and check the box that says "Stereo Mix" instead of the one that says "Mic Volume"
Offline