So far outcome on marketing meet: release date for tutorial has been set for next friday! We're gonna have a project on joletole's account that advertises our tutorials, and i'll probably end up adding it to the sch.
Offline
hey, guys. I've recieved a job application from stevetheipad. He says he's interested in helping improve the forums, which would involve switching over to fluxbb. The reason I chose phpbb3, is because communities all over the world are switching from vbulletin/fluxbb, to phpbb3 because of it's stability, performance, and visual appeal. It is also very lightweight. But, I am curious as to see what he can do. So, what should we do?
and honestly, phpbb3 was a fill in until we decided to make our own forum software...
Last edited by XenoK (2012-06-17 08:24:44)
Offline
XenoK wrote:
hey, guys. I've recieved a job application from stevetheipad. He says he's interested in helping improve the forums, which would involve switching over to fluxbb. The reason I chose phpbb3, is because communities all over the world are switching from vbulletin/fluxbb, to phpbb3 because of it's stability, performance, and visual appeal. It is also very lightweight. But, I am curious as to see what he can do. So, what should we do?
and honestly, phpbb3 was a fill in until we decided to make our own forum software...
bump
Offline
XenoK wrote:
hey, guys. I've recieved a job application from stevetheipad. He says he's interested in helping improve the forums, which would involve switching over to fluxbb. The reason I chose phpbb3, is because communities all over the world are switching from vbulletin/fluxbb, to phpbb3 because of it's stability, performance, and visual appeal. It is also very lightweight. But, I am curious as to see what he can do. So, what should we do?
and honestly, phpbb3 was a fill in until we decided to make our own forum software...
How about we create a subdomain for steve the Ipad to use fluxbb, also when I do finish tasks, perhaps we could php collab on forum software also, while I'm doing some background coding on tasks, do you want to do some css for it or just remove the Iframe border to make it look like part of the page.
Offline
P110 wrote:
XenoK wrote:
hey, guys. I've recieved a job application from stevetheipad. He says he's interested in helping improve the forums, which would involve switching over to fluxbb. The reason I chose phpbb3, is because communities all over the world are switching from vbulletin/fluxbb, to phpbb3 because of it's stability, performance, and visual appeal. It is also very lightweight. But, I am curious as to see what he can do. So, what should we do?
and honestly, phpbb3 was a fill in until we decided to make our own forum software...How about we create a subdomain for steve the Ipad to use fluxbb, also when I do finish tasks, perhaps we could php collab on forum software also, while I'm doing some background coding on tasks, do you want to do some css for it or just remove the Iframe border to make it look like part of the page.
good idea, just to see what he can do! and I'll work on it.
Offline
XenoK wrote:
hey, guys. I've recieved a job application from stevetheipad. He says he's interested in helping improve the forums, which would involve switching over to fluxbb. The reason I chose phpbb3, is because communities all over the world are switching from vbulletin/fluxbb, to phpbb3 because of it's stability, performance, and visual appeal. It is also very lightweight. But, I am curious as to see what he can do. So, what should we do?
and honestly, phpbb3 was a fill in until we decided to make our own forum software...
I like that idea.
Offline
joletole wrote:
XenoK wrote:
hey, guys. I've recieved a job application from stevetheipad. He says he's interested in helping improve the forums, which would involve switching over to fluxbb. The reason I chose phpbb3, is because communities all over the world are switching from vbulletin/fluxbb, to phpbb3 because of it's stability, performance, and visual appeal. It is also very lightweight. But, I am curious as to see what he can do. So, what should we do?
and honestly, phpbb3 was a fill in until we decided to make our own forum software...I like that idea.
thanks! lets get back on the topic in the forums to further discuss the project advertisement.
Offline
well, 000webhost didn't let me use the other sub-domain, or let me backup the current forums. So I let steve just upload fluxbb on the current sub-domain. Unfortunately, we'll be starting from scratch again, and everyone will have to register once more.
Offline
P110 wrote:
XenoK wrote:
P110:
http://i1049.photobucket.com/albums/s38 … ocurve.png
link: http://i1049.photobucket.com/albums/s385/xenokstudios/P110Techlogocurve.pngOh, didn't notice this :facepalm: THANKS!
lol, no problem. Steve has gotten started on the forums.
Offline
Ok, here is the outro section looked over any changes are in blue:
Welcome to the fourth, and final section of the tutorial: The Outro. Here, we close up the tutorial with a thanks to the contributors, and to you, who took the time to read through it all. We hope you had fun with it, and wish you luck with your explorations!
Eternity Tutorials: How to enable mesh taught you, how to enable mesh on the scratch project editor. It gave you a practice for implementing the feature, and it introduced to you several example uses of this feature. Many things can be done with mesh, you just need to be creative. And with that, we wish you good luck with your further explorations into the Scratch World! We look forward to bringing you more projects, and continue to revolutionize entertainment in the Scratch Community. To show your appreciation for the work [/s] that were put into the creation of this tutorial, hit the love it button. To stay constantly updated with all things Eternity Incurakai, visit our website @ www.eternityinc-official.com - and keep in touch with us through blog posts, forum posts, and more! You can even get involved with the Eternity Society through our forums, wiki, and so much more! You can even browse through all of our currently released projects on there! Join the revolutionary entertainment today @ www.eternityinc-official.com!
should this be in a 'Thanks' section?
Furthermore, we would like to thank Trinary for his graphics contribution, as he has recently left the group to attend to other matters. We would like to thank the whole team for collaborating on this project, it has been a pleasure to work together. We would like to thank you and all of the viewers that have taken the time to look through this project, and to the Scratch team for providing us all with a wonderful program in which we can express ourselves, and in our case, provide us something to work with! Thank you, everyone!
You have reached the end of this tutorial. Thanks for reading, and Live the Eternity!
Hope this helps XenoK!
Last edited by P110 (2012-06-17 13:00:59)
Offline
P110 wrote:
Ok, here is the outro section looked over any changes are in blue:
Welcome to the fourth, and final section of the tutorial: The Outro. Here, we close up the tutorial with a thanks to the contributors, and to you, who took the time to read through it all. We hope you had fun with it, and wish you luck with your explorations!
Eternity Tutorials: How to enable mesh taught you, how to enable mesh on the scratch project editor. It gave you a practice for implementing the feature, and it introduced to you several example uses of this feature. Many things can be done with mesh, you just need to be creative. And with that, we wish you good luck with your further explorations into the Scratch World! We look forward to bringing you more projects, and continue to revolutionize entertainment in the Scratch Community. To show your appreciation for the work [/s] that were put into the creation of this tutorial, hit the love it button. To stay constantly updated with all things Eternity Incurakai, visit our website @ www.eternityinc-official.com - and keep in touch with us through blog posts, forum posts, and more! You can even get involved with the Eternity Society through our forums, wiki, and so much more! You can even browse through all of our currently released projects on there! Join the revolutionary entertainment today @ www.eternityinc-official.com!
should this be in a 'Thanks' section?
Furthermore, we would like to thank Trinary for his graphics contribution, as he has recently left the group to attend to other matters. We would like to thank the whole team for collaborating on this project, it has been a pleasure to work together. We would like to thank you and all of the viewers that have taken the time to look through this project, and to the Scratch team for providing us all with a wonderful program in which we can express ourselves, and in our case, provide us something to work with! Thank you, everyone!
You have reached the end of this tutorial. Thanks for reading, and Live the Eternity!Hope this helps XenoK!
thanks!
Offline