Scratch

Changing the logo can be done with a series of blocks I made for the Library.  They haven't been updated into the library yet, though...if you need me to find them, I'll try.

nickbrickmaster wrote:

that exploded out of nowhere...

when gf clicked
bump

Last edited by zorket (2012-02-10 17:19:48)

We decided to base Explosion off of kitkat. I'm going to look for the base, then i'll ask for help!

I've never done a mod, I'm not good with squeak, but maybe I can help 

funelephant wrote:

funelephant wrote:

I've never done a mod, I'm not good with squeak, but maybe I can help 

Although, I am pretty good with scratch!

Sure, you are on the list of developers! You can quit any time you want if you choose, though.

If we change the spelling, this could be the logo.

I am a dev, right?

zorket wrote:

Here are the things that I want to explode in explosion:

-Logo change
-Sprite change
-Pop-up REAL dialogs for simple dialogs (We need code to activate any EXE script! I've got the file ready!)
-Co-op engine, blocks at the bottom (Except for the if block)

Well, as. It just so happens, (and I took the code from BYOB) I have code to open files! Since it opens in the default application, it will open exe's! Ill get you the code in a bit (maybe an hour, I dont know where I put kitcat    )

funelephant wrote:

Fixed!
http://troll.ws/N0hsT0

Actually, that's a lot better than mine! We'll see how we can get it in!

when gf clicked
say [I am addicted to these scripts!]
blow up logo
blow up this script
laugh

Greenatic wrote:

zorket wrote:

We'll see how we can get it in!

1.  Turn off fill-screen.
2.  Hold down alt, and click the logo three times.
3.  Out of the buttons that appear, select the red one in the upper-left, to the right of the X.
4.  Select "read from file" from the menu.
5.  Import the file.
6.  Save the image for end user.

There is just one problem with that: THERE IS NO FILL-SCREEN FUNCTION EVEN WITH SHIFT!

Sorry, I just got pretty frustrated with step one. I DO have access to the browser, but I can't turn the fill screen off.

Hey, wait a minute! You said earlier that you could make a block that turns the fill screen off. Can you give me the code at least? Thanks!

Last edited by zorket (2012-02-12 09:52:08)

nXIII wrote:

Greenatic wrote:

zorket wrote:

We'll see how we can get it in!

1.  Turn off fill-screen.
2.  Hold down alt, and click the logo three times.
3.  Out of the buttons that appear, select the red one in the upper-left, to the right of the X.
4.  Select "read from file" from the menu.
5.  Import the file.
6.  Save the image for end user.

The problem with that is if you reopen the ScratchFrame it have the original logo again. If you download the ScratchSkin folder and replace scratchLogo with your logo and delete scratchLogo_XO, reload the skin, and reopen the ScratchFrame your change will be permanent.

zorket wrote:

There is just one problem with that: THERE IS NO FILL-SCREEN FUNCTION EVEN WITH SHIFT!

Sorry, I just got pretty frustrated with step one. I DO have access to the browser, but I can't turn the fill screen off.

Hey, wait a minute! You said earlier that you could make a block that turns the fill screen off. Can you give me the code at least? Thanks!

If you alt-click the frame just once, it will select the ScratchFrameMorph. Click the wrench icon and select "inspect". Place the inspector somewhere and type "self fillScreenOff" (no quotes), then press alt+d (or right-click and select "do it").

HELLO? Anybody home?

No one ever listens to me. It only works with the fill screen off! Look above!

zorket wrote:

Greenatic wrote:

zorket wrote:

We'll see how we can get it in!

1.  Turn off fill-screen.
2.  Hold down alt, and click the logo three times.
3.  Out of the buttons that appear, select the red one in the upper-left, to the right of the X.
4.  Select "read from file" from the menu.
5.  Import the file.
6.  Save the image for end user.

There is just one problem with that: THERE IS NO FILL-SCREEN FUNCTION EVEN WITH SHIFT!

Sorry, I just got pretty frustrated with step one. I DO have access to the browser, but I can't turn the fill screen off.

Hey, wait a minute! You said earlier that you could make a block that turns the fill screen off. Can you give me the code at least? Thanks!

You mean in Kitcat? You can turn th fill screen off, but its worded "exit user mode", and it only shows up if you are not connected to the internet then open Kitcat, and (2) to log in as gp1. I sent you an email with a link to Kitcat in it, giving you directions to the fill-screen.